
Open routes
MQTT and Energis.Cloud
MQTT is the publish and subscribe protocol many devices and gateways already speak. A device publishes its readings to a topic on the Energis.Cloud broker, and a message in the Energis.Cloud MQTT format is read right away, with nothing to develop.
MQTT on Energis.Cloud on , across all customers.
What Energis.Cloud reads from MQTT
- Electricity consumption
- Electricity injected into the grid
- Temperature
- Currents
- Weather
Readings are mostly stored as 10-minute values, some as 1-minute. Used in France, Belgium, Netherlands.
What the MQTT connection gives you
Equipment you already run
Any device, gateway or IoT platform that publishes MQTT can send its readings. A message in the default format needs no development.
Readings within minutes
Devices publish as they measure, so readings appear within minutes, without a scheduler on your side.
Resend to correct
A reading with a timestamp already stored is replaced, so resending a corrected batch fixes the period.
Next to everything else
Every measurement you publish sits in the same portfolio as your meters, grid operators and building systems, with the same KPIs.
How the connection is switched on
Open the route
Energis.Cloud support gives you the broker, the topic root and an account allowed to publish on your topic.
Name the topic
The topic starts with your organisation, your customer or division and the site. What follows, a gateway or a device, is yours to structure.
Publish the readings
Each message carries a DeviceId, a DeviceType and its Measurements: per measurement, a list of timestamped values with a unit.
Connected to your assets
The first message creates a data source with one data point per measurement name. Each data point is connected to its asset once.
See your MQTT data on Energis.Cloud



